Hitachi Excavator Zaxis 50U-3
The advantage of hydraulic technology allows for more efficient and productive functioning. Body with a Short Rear End and a Compact Front End It can operate efficiently in limited locations because of the compact short rear-end design. The front attachment has been modified to provide increased strength and dependability. The boom top has been reinforced to reduce jerking caused by wear. The cab size, which meets European requirements, is the biggest available among compact excavators, allowing for a more comfortable and effective operation. A steel cover is used for robust operation, which allows for simple replacement if it is broken. The steel cover is long-lasting, recyclable, and cost-effective. This article will focus on the Hitachi Excavator Zaxis 50U-3.
Hitachi Excavator Zaxis 50U-3 Performance and Fuel Economy
The Yanmar diesel engine complies with the EPA Final Tier 4 (FT4) and EU Stage IV emission requirements. It’s simple to maintain and doesn’t need any special fluids — only ultra-low-sulfur diesel fuel and CJ-4 engine oil are all that’s needed.FT4 technology makes use of field-proven cooled exhaust gas recirculation to minimize NOX emissions, as well as a diesel particulate filter and a diesel oxidation catalyst to reduce particulate matter emissions. With power/economy work modes, you may match the engine speed to the task at hand. Selecting the power option will result in faster engine speeds for most regular digging tasks. When doing lesser digging tasks, the economy mode minimizes engine speed and noise and fuel consumption, and expenses.
Design
Although the Hitachi Zaxis 50U-3 isn’t meant to replace a grading tractor, common backfill blades make it easy to fill in. Grade and backfill operations may be made even more efficient by using a hydraulic blade tilted 25 degrees to the left or right. Rubber tracks may be utilized on any surface, including paved ones, with comparable simplicity and convenience. Steel tracks and steel tracks with rubber pads are available. With the optional rubber grousers, the X-frame provides a sturdy and durable base that is resistant to material and dirt build-up, allowing for flexible work-anywhere capabilities.
All you need to go over truck sideboards is a lift with a high enough reach and height. Attaching accessories is a cinch with the standard quick-couplers included with the auxiliary hydraulic lines mounted on the boom. In addition to a wide variety of attachments, such as breakers and augers, the wedge-style coupler enables quick attachments and bucket changes. It is possible to strengthen the structural integrity of digging components by using a single-pin swing post. Hoses with high abrasion resistance are Cordura-wrapped and routed for further security. The boom/blade cylinders and motors are kept secure by robust shields to deflect debris and collisions.
Cab Comfort
Entrance and exit are made easier than ever before thanks to the wide entryway on the Hitachi Zaxis 50U-3 operator station. Flat and skid-resistant floor mats may be easily removed for cleaning. Additionally, the seatback has a large cup holder and a pocket for documents. The engine operates considerably more quietly because of the noise-reducing muffler and the isochronous high-idle speed. With rubber cab mounts, noise and vibration will be further reduced, resulting in less operator fatigue and more productivity. Noise levels are kept low by combining a treatment device and an isochronous high-idle speed motor. Operator fatigue and productivity may be reduced because of rubber cab mounts’ additional noise and vibration isolation.
Backhoe to Excavator Operation Change
You can switch between backhoe and excavator controls with the flick of a wrist. Under the Hitachi Excavator Zaxis 50U-3, the driver’s seat is a convenient location for the control-pattern selection valve. The pilot control levers must have short throws to be used with as little effort as possible. An ample foot room is provided by the placement of the swing boom and folding travel pedals. The activation of the operator is not required for high-speed transport. When the travel motors are under more stress, the train’s speed automatically decreases. On the console, there is a low-speed lock switch.
Specification
- Height: 18.48ft
- Length: 6.53ft
- Width: 6.57ft
- Operating weight: 10560 lbs
Engine type: 4TNV88, 38.1hp
Vehicle type: excavator
Fuel tank: 18.5 gallons
Hitachi Excavator Zaxis 50U-3 Factory Service Manual
The service manuals for the Hitachi Excavator Zaxis 50U-3 are extensive, covering every vehicle service and repair procedure. A service manual is available for purchase for the Hitachi Excavator Zaxis 50U-3:
- Maintenance
- General
- Service
- Engine
- Electrical
- Power Transmission
- Information System
- Cab
- Brakes
- Steering
- Interior
- Hydraulic System
These Hitachi Excavator Manual books are intended for technicians and dealerships that regularly maintain and repair vehicles. The owner may use these service instructions to verify that any maintenance or repairs are done properly and exactly on every occasion.
Hitachi Excavator Zaxis 50U-3 — Owner’s Manual
The owner’s manual for a Hitachi Excavator Zaxis 50U-3 contains all of the important information on the vehicle’s future operation and maintenance.
- Safety and Security
- Operation of each component
- Driving
- Interior Features
- Maintenance and care
- Vehicle specifications
This owner’s manual, written just for owners, will explain when and how to use their vehicle’s numerous features and functions in detail.