MAHINDRA WHEEL TRACTOR 8560 - Repair Manuals Blog

The India-built Mahindra Wheel Tractor 8560 is built on Mahindra’s cast iron chassis. The resulting engine and gearbox, both of which are built for heavy-duty use, serve as frame components. Because of this, the Mahindra Wheel Tractor 8560 becomes heavier. As we all know, higher weight equates to improved traction and the ability to accomplish more labor in tough conditions.

This vehicle is powered by an intercooler direct-injected four-cylinder engine with turbocharging. The following intercooling from Mahindra generates 83 gross hp at 2300 rpm. You may be certain that the power take-off (PTO) output is rated at 70 hp, with torque reaching an impressive 225 ft-lbs, so the 8560 has the power reserves to tackle those challenging conditions. Because the cylinder liners are wet-changeable, they have a longer life span, and an air intake cold start aid is offered for those who live in cold climates.

Performance and Fuel Economy

A 12F/12R synchro shuttle gearbox is used to transfer power to the ground, which is operated by a dual dry clutch with an improved ceremetallic lining. The 8560 is equipped with a two-speed, entirely independent power take-off (PTO) and a unique dry reversible shaft for added convenience. It is possible to produce 540/1000 PTO RPMs at engine speeds of 2186 and 2180 RPMs, respectively. Buyers will welcome selectable PTO since it opens up a greater variety of available equipment such as mowers and balers and enhanced price competition among manufacturers, according to the company.

It is possible to meet the power steering and application requirements using an open center full-live hydraulic system, which provides 5.3 GPM for the power steering and 17 GPM for the implementation requirements. The lifting capability has been enhanced to 5500 lbs with the new Cat II three-point hitch (3PH). Tools may be attached to the lift arms with telescoping ends thanks to telescoping lift arms and a telescoped outboard stabilizer, which are both available as options. Adjustable position and draught control come as standard, and the drawbar is adjustable and swings, giving the operator more choices for centering the drawbar. Two rear remotes are standard, with a third option, and each features a detent, float, and kick-out feature – the latter of which operates after the vehicle has been raised or lowered.

Design, Functionality, and Quality

The windshield of the Mahindra 8560 is built of thick laminated glass to protect against the elements and noise. The glass in the doors and rear windows has been tinted to provide more privacy and reduce reflections. The slanted glass behind the seat allows the operator to see everything, including the 3PH, PTO, and drawbar. This is an excellent feature included in the 8560. The back window may be opened to allow for ventilation. However, unlike the smaller brother 6110 we inspected in October, the rear quarter windows are not adjustable. In addition, folding armrests, a retractable seatbelt, a sun visor, an adjustable steering wheel, a cup holder, a link pin tray, a 12V outlet, and an ashtray and cigarette lighter are all features that smokers will like.

Lighting

The extra halogen headlights, which were located in the higher hood and which we anticipated would impede poorer visibility, did not interfere in the least. Consumers will appreciate the additional illumination and the four front and two rear cab lights.

Bucket Capacity

The bucket has a capacity of 84 liters. “This trailer has a cargo capacity of 21 cubic feet and is skid steer compatible, enabling it to be utilized with a variety of equipment such as bale spears and pallet forks.

Lift Capacities

There is a maximum lift capacity of 4100 pounds to a height of 134 inches with this machine. With a full dump clearance of 102.5 inches, it is possible to “, this combination is capable of clearing practically any trailer or vehicle that an operator may want to use. With 17 GPM of water flowing to the loader, response times were excellent, with raise taking 6.2 seconds, lower taking 4.1 seconds, dump taking 3.2 seconds, and curl taking 2.5 seconds. Our first thought was that the ML285 would be difficult to remove because of its weight of 2090 lbs, but then we saw that the supports were tucked away in the boom cross member.

Specifications of the Mahindra 8560 Tractor

Height: 108.2 in
Length: 162 in
Width: 77.3 in
Weight: 6,878 lbs

Engine type: 203.2 ci or 3.3 L, 2300 (rpm)

Vehicle type: Utility tractor

Fuel Capacity / Gas Tank Size: 19.3 gal

MAHINDRA WHEEL TRACTOR 8560 Service Manual

The MAHINDRA 8560 manual details components comprehensively. Each repair should include the MAHINDRA Wheel Tractor 8560 service manual as it covers:

Introduction
Engine
Fuel system
Electrical system
Transmission
Axles
Brake system
Power take-off system
Steering system

Technicians and dealerships should use MAHINDRA 8560 repair manuals. While maintaining or repairing his tractor, every tractor owner should have a service manual on hand.

MAHINDRA WHEEL TRACTOR 8560 — Owner’s Manual

Customers who purchased a MAHINDRA Wheel Tractor 8560 owner’s manual were provided an owner’s manual with extensive information on how to do regular maintenance and repairs. By following the directions in the owner’s handbook, you may perform all of the vehicle’s operations.

Safety
Maintenance
Chassis
Engine
Drive and Transmission
Electrical
Wiring

Although the MAHINDRA 8560 owner’s manual has extra operational suggestions to assist the driver in operating the vehicle more readily, these are the most important to be aware of.

MAHINDRA WHEEL TRACTOR 8560 Price

The MAHINDRA WHEEL TRACTOR 8560 can be bought at set price $58,490.